Outdoor Power / Small Engine / Bicycle Repair Services

Routine maintenance is a critical component of outdoor power equipment ownership. Without preventative services, your equipment’s vital parts and fluids would soon begin to fail, resulting in the unit requiring much more expensive repair. Keith's Bike & Mower can handle your needs for outdoor power equipment repair and maintenance in and around the Mundelein, IL area. When your mower, snow blower or handheld outdoor power tool is due for factory service, or if you are experiencing starting or running issues, please give us a call to schedule an appointment. We specialize in:

Domestic Outdoor Power Equipment Maintenance and Repair
Foreign Outdoor Power Equipment Maintenance and Repair
Battery Servicing and Replacement
Oil Change & Filter Replacement
Air Filter/Pre-filter Replacement
Belt & Hose Replacement
Fuel Filter Replacement
Spark Plug Replacement
Hybrid Mower Services
Preventative Maintenance

Keith’s Bike & Mower has a full selection of maintenance and repair services to keep your equipment running at peak performance. If your equipment isn’t performing like it should, see our detailed list of outdoor power equipment or bicycle repair services below:

Push/Self-Propelled/Hybrid Mowers

Service Details

Restore the performance of your Lawn Mower at Keith's Bike & Mower. We service most brands.

Our Push Mower / Self-Propelled / Hybrid Mower tune-up service includes:

Change oil using SAE 30W. Remove spark plug and inspect to determine engine condition. Set gap and change spark plug. Re-torque cylinder head bolts. Drain fuel system and carburetor. Remove and clean air filter housing. Clean float bowl and main jet. Check float level and reassemble using new float bowl gasket $3.75. (Install new air box gasket on all Briggs and Stratton engines $3.75). Remove cover and inspect self-propel drive system - if applicable. Clean underside of mower deck. Remove, sharpen and balance blade (replace if too damaged to sharpen). Clean and lube front and rear wheel axles. Level mower deck height of cut to 2.5". Lube engine brake and drive engagement handle pivots. Vacuum top of mower and wipe clean. Add sufficient stabilized fuel to performance test mower and check readiness for summer mowing season.

Pricing

$99.95 (Honda mowers: $109.95)

$149.95 - Hybrid Mowers

Please note: Because of the rising cost of air and pre-filter elements, they are not included in tune-up. If an air filter needs to be replaced, it will be itemized in the final tune-up price. Any additional parts needed will be quoted first and installed upon customer authorization.

Pick up and delivery service is available. Please call for details and rates.

Rear Engine Riding Mowers / Lawn Tractors / Zero Turn Mowers

Service Details

Restore the performance of your Rear Engine Riding Mower, Lawn Tractor or Zero Turn Mower at Keith's Bike & Mower. We service most brands.

Our Rear Engine Riding Mower / Lawn Tractor / Zero Turn Mower tune-up service includes:

Inflate tires. Change oil using SAE 30W (and filter, if so equipped). Change or clean air filter and clean air box. Drain carburetor bowl and inspect fuel lines. Change fuel filter. Remove spark plug(s) and inspect to determine engine condition. Set gap and install new spark plug(s). Lightly clean underside of mower deck. Remove, sharpen & balance two mower blades (Add $10.00 for third blade, if applicable. Replace blades if needed upon customer approval). Inspect mower deck and drive belts. Lube deck lift pivots. Grease all front steering zerk fittings. Inspect battery and top charge if needed. Clean top surfaces of tractor. Add sufficient amount of stabilized fuel to test tractor for proper operation and summer mowing season readiness.

Pricing

Rear-engine rider: $169.95
Lawn tractor: $229.95
Zero-turn: $249.95

Pickup and delivery are available. Call for details and rates.

Snowblowers (Single or Two Stage)

Service Details

Restore the performance of your single or two-stage snow blower at Keith's Bike & Mower. We service most brands.

Our snowblower tune-up service includes:

Wipe off snow blower housing, chassis, handle assembly and shrouds. Remove chute and cowling. Remove spark plug and inspect to determine engine condition. Set gap and install new spark plug. Drain fuel system, clean carburetor bowl and main jet. Replace fuel filter if so equipped. Change engine oil with 5W-30W (Full Synthetic 5W-30W available at additional cost) on 4 stroke single stage snow blowers. Clean and lube chute pivot mechanism. Re-assemble cowling. Remove auger belt cover, vacuum loose belt dust. Inspect belt condition, engagement bearing, cable and springs. Check auger belt engagement and adjust as necessary. Re-assemble cover. Replace if needed or adjust scraper blade. Lube handle pivots and axles. Refuel with sufficient stabilized fuel to test run and confirm proper operation and winter season readiness.

Pricing

$99.95 - Single Stage

$129.95 - Two Stage

Please note: Auger Belts needing replacement will be done at time of service. The Auger Belt price and replacement labor will be added to the repair ticket total. Any additional parts needed will be quoted first and installed upon customer authorization.

Pick up and delivery service is available. Please call for details and rates.

Bicycle Service & Repair

Service Details

Restore the performance of your Chain Saw at Keith’s Bike & Mower. We service most brands.

Our bicycle tune-up service includes:

Clean bike frame. Inflate tires to tire specified pressure. True front and rear wheels. Lube front and rear brake assembly pivots. Balance brake pad to rim engagement. Inspect chain with link stretch gage to determine chain condition. Suggest replacement to customer if needed. Lube chain. Clean front and rear derailleurs. Lubricate all derailleur pivot points and adjust for smooth and accurate shifting. Performance test all systems to insure proper adjustments have been made and readiness for bike riding season.

Pricing

$79.95

Please note:

Any additional parts needed will be quoted first and installed upon customer authorization.

Accessories purchased at Keith’s Bike & Mower can be installed at a reduced rate with tune-up.

We offer same day service for tire replacement and flat tire repair service! Sometimes while you wait...

Hand-Held Power Equipment

Service Details

Restore the performance of your hand-held power equipment at Keith’s Bike & Mower. We service most brands.

Our hand-held power equipment tune-up service includes:

Clean external body. Remove recoil assembly and clear dust and debris from flywheel, shroud and cooling fins. Drain fuel tank. Inspect, clean or replace fuel filter. Remove air box/engine cowling. Remove air filter and brush/vacuum carburetor exterior and throttle linkage. Clean or replace air filter element. Remove spark plug and inspect to determine engine condition. Set gap and install new spark plug. Re-install air box/engine cowling. Fuel saw with stabilized fuel and test/tune for proper operation.

Chain saw service also includes: Remove chain bar cover, bar and chain. Inspect chain brake. Clean saw chips from chain oiling system ports, sprocket and chain path. Inspect chain and bar. Sharpen chain with chain grinder. Clean chain/bar cover and micro adjust system. Install bar, chain and bar cover. Tighten chain to snap fit in bar groove. Check bar oil.

Pricing

$74.95 - Most hand-held power equipment

$89.95 - Chain saws

Please note: Any additional parts needed will be quoted first and installed upon customer authorization.

Portable Generators

Service Details

Restore the performance of your generator at Keith’s Bike & Mower. We service most brands.

Our portable generator tune-up service includes:

Clean generator frame, engine shrouding and commutator housing. Drain and change engine oil. Remove spark plug and inspect to determine engine condition. Set gap and install new spark plug. Remove air box and filter. Change/clean per filter style. Remove carburetor bowl nut, main jet, float bowl, float and needle assembly. Drain off bottom of fuel tank and determine if water is present in gas and carburetor. Clean emulsion tube, bowl vents, low speed pilot and main jet. Check float shut off level and seat condition. Install all removed and cleaned components. Refuel with sufficient stabilized fuel. Start engine and check/set engine no load RPM (3400 - 3,750) per manufacturers specification. Check Hz out put (59 - 63) Confirm proper engine operation and on-demand electrical power readiness.

Pricing

Varies by size and type of generator

Please note: Any additional parts needed will be quoted first and installed upon customer authorization.

Pick up and delivery service is available. Please call for details and rates.